[Strawbale] 7story SB buildings in France - details

[asbn]

Dear - the sky is the limit - André

Thank you very much for these informations,
its great, how French companies built houses,
since the French Building Code is established.

And its great how you support us with the details.
Merci beaucoup!

Meilleurs souvenirs,
all the best
Herbert
-----------------
asbn - austrian strawbale network
3720 Ravelsbach, Baierdorf 6
Tel. 02958-83640
asbn at baubiologie.at
www.baubiologie.at



Am 18.05.2013 um 12:29 schrieb contact at lamaisonenpaille.com:

> Here are details and pics given by Vincent Pierré - Terranergie :  
> Bureau d'Etude : Thermique - Energétique - Matériaux - Permaculture  
> - Transition énergétique. terranergie at aliceadsl.fr
>
> The prefab panels are made of Agepan DWD16
> rigidified by wood 40X40mm (1.57") glued and nailed
>
> Panels:
> 2500X1250X400mm
> 98.4"x49.2x15.7"
>
> Bales
> 490X380X1200mm
> 19.2x14.9x47.2"
> Density (probably dry) 135kg/m3
>
> Primary wood structure
> KLH-board 150mm (5.9") cross laminated timber-box
>
> Did someone from the French strawbale community act as a consultant  
> for the straw bale aspects?
> Vincent Pierré, member of our French SB Network did the design,  
> defined the size, density of bales to use, tested the filling of the  
> panels etc.
>
> Did the architect in the video have previous experience with straw  
> bale building?
> No.
>
> What are the blue pastic-buttons in the wall (for measurement?)
> They are télescope SFS INTEC that hold the bales against the wood  
> structure without creating a thermal bridge.
>
> what about the load transfer of the modules, are they just fixed on  
> the KLH-board (cross laminated timber-box)?
> The loads descend through the uprights on the exterior that form I  
> beams and are supported by the foundation.
>
> Do you know, did they only cut the strings of the bales or did they  
> fill in loose straw as well to avoid gaps?
> They checked if the cutting of the strings sufficed for filling the  
> holes (and it did)
> The bales are compressed to achieve 135kg/m3 and are 2cm (0.78")  
> shorter than the space to fill. After cutting the strings there are  
> no more empty spots.
>
> And a little correction : Acording to Passiv Haus standard (15 kWh/ 
> m2) this social housing should NOT exceed 130€ per year for heating,  
> cooling, ventilation and warm water costs for an appartment of 90m²  
> (about 900ft²).
>
> Bye,
> André - the sky is the limit - de Bouter
> ____________________________________________________
>   European strawbale building discussion list
>
> Send all messages to:
> Strawbale at amper.ped.muni.cz
>
> Archives, subscription options, etc:
> http://amper.ped.muni.cz/mailman/listinfo/strawbale
> ____________________________________________________
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://amper.ped.muni.cz/pipermail/strawbale/attachments/20130518/0d242e78/attachment.html>