In the left half of the left plot, specific illuminance by a continuous row of luminaires spaced 5 heights is shown (right half is for a single luminaire). | The right plot is for a single luminaire, unrotated. |
Values below the scale are illuminance / 1 lx. This is for (unrealistic) “unit” case that luminaires would have lamps producing 1 klm only, would be point-like and just 1 m over the terrain.
# IESNA91 # [TEST] LSI 14697 # [DATE] 04/27/00 # [MANUFAC] RUUD LIGHTING # [LUMCAT] RR8DAV32-AF # [LUMINAIRE] 8" RECESSED W/CLEAR ALZAK REFLECTOR # [LAMP] 32W FL # # TILT=NONE # Bulbs: 1, 1870 lm each # Number of measured angles: 37 vertical, 1 horizontal ones # Photometric type: 1, Units type: 1 # Luminous opening diameter (and height?): 0.630 ( 0.000 ) # Ballast factor: 1, Input power: 32 W # Source file: rr8dav32-af.ies # Luminaire flux = 876 lm, # 46.8 % of the bulb flux # between 75 and 90: 0.1 % of the luminaire flux # - this part causes just GLARE in case of road lighting and similar purposes # 80deg and above: max 0.5 cd/1000lm , 0.1 % of the luminaire flux # 90deg and above: max 0.3?cd/1000lm , 0.0?% of the luminaire flux # CutOff Type: Full_CutOff # 62.5 deg to <67.5 deg: max 3 cd/1000lm, # 67.5 deg to <72.5 deg: max 2 cd/1000lm, # maximum spec. lum. intensity 390 cd/1000lm # The following table gives luminous intensities which would be produced # using a hypothetic bulb giving a luminous flux of 1000 lm (i.e., cd/klm): 0.0 381 2.5 388 5.0 390 7.5 386 10.0 378 12.5 366 15.0 349 17.5 339 20.0 332 22.5 321 25.0 301 27.5 281 30.0 259 32.5 232 35.0 206 37.5 182 40.0 159 42.5 126 45.0 58.1 47.5 30.7 50.0 12.5 52.5 7.9 55.0 6.2 57.5 5.0 60.0 3.9 62.5 3.2 65.0 2.5 67.5 2.0 70.0 1.5 72.5 1.2 75.0 0.9 77.5 0.6 80.0 0.5 82.5 0.4 85.0 0.3 87.5 0.3 90.0 0.3 # IESNA91 # [TEST] LSI 14697 # [DATE] 04/27/00 # [MANUFAC] RUUD LIGHTING # [LUMCAT] RR8DAV32-AF # [LUMINAIRE] 8" RECESSED W/CLEAR ALZAK REFLECTOR # [LAMP] 32W FL # # TILT=NONE # Bulbs: 1, 1870 lm each # Number of measured angles: 37 vertical, 1 horizontal ones # Photometric type: 1, Units type: 1 # Luminous opening diameter (and height?): 0.630 ( 0.000 ) # Ballast factor: 1, Input power: 32 W # Source file: rr8dav32-af.ies # Luminaire flux = 876 lm, # 46.8 % of the bulb flux # between 75 and 90: 0.1 % of the luminaire flux # - this part causes just GLARE in case of road lighting and similar purposes # 80deg and above: max 0.5 cd / 1000 lm , 0.1 % of the luminaire flux # 90deg and above: max 0.3?cd / 1000 lm , 0.0?% of the luminaire flux # CutOff Type: Full_CutOff # 62.5 deg to <67.5 deg: max 3 cd / 1000 lm, # 67.5 deg to < 76 deg: max 2 cd / 1000 lm, # maximum spec. lum. intensity 390 cd / 1000 lm # The following table gives luminous intensities which would be produced # using a hypothetic bulb giving a luminous flux of 1000 lm (i.e., cd/klm): 0.0 381 2.5 388 5.0 390 7.5 386 10.0 378 12.5 366 15.0 349 17.5 339 20.0 332 22.5 321 25.0 301 27.5 281 30.0 259 32.5 232 35.0 206 37.5 182 40.0 159 42.5 126 45.0 58.1 47.5 30.7 50.0 12.5 52.5 7.9 55.0 6.2 57.5 5.0 60.0 3.9 62.5 3.2 65.0 2.5 67.5 2.0 70.0 1.5 72.5 1.2 75.0 0.9 77.5 0.6 80.0 0.5 82.5 0.4 85.0 0.3 87.5 0.3 90.0 0.3