|
|
|
| In the left half of the left plot, specific illuminance by a continuous row of luminaires spaced 5 heights is shown (right half is for a single luminaire). | The right plot is for a single luminaire, unrotated. |
Values below the scale are illuminance / 1 lx. This is for (unrealistic) “unit” case that luminaires would have lamps producing 1 klm only, would be point-like and just 1 m over the terrain.
# IESNA91
# [TEST] LSI 37490
# [DATE] 10/22/90
# [MANUFAC] RUUD LIGHTING
# [LUMCAT] QV417
# [LUMINAIRE] 16" QUADRATE VERTICAL / TYPE V
# [LAMP] 175 WATT MH
# TILT=NONE
# Bulbs: 1, 14000 lm each
# Number of measured angles: 11 vertical, 5 horizontal ones
# Photometric type: 1, Units type: 1
# Luminous openig width, length and height: 1.370 1.370 0.000
# Ballast factor: 1, Input power: 215 W
# Source file: qv417.ies
# Luminaire flux = 9864 lm,
# 70.5 % of the bulb flux
# between 75 and 90: 6.2 % of the luminaire flux
# - this part causes just GLARE in case of road lighting and similar purposes
# 80deg and above: max 1.8 cd/1000lm , 0.0 % of the luminaire flux
# 90deg and above: max 0.0 cd/1000lm , 0.0 % of the luminaire flux
# CutOff Type: Full_CutOff
# 62.5 deg to <67.5 deg: max 265 cd/1000lm,
# 67.5 deg to <72.5 deg: max -7 cd/1000lm,
# maximum spec. lum. intensity 265 cd/1000lm
# The following table gives luminous intensities which would be produced
# using a hypothetic bulb giving a luminous flux of 1000 lm (i.e., cd/klm):
# H: 0.0 22.5 45.0 67.5 90.0
#V:
0.0 28.1 28.1 28.1 28.1 28.1
5.0 32.3 32.1 32.0 32.1 32.3
15.0 58.8 59.3 58.1 59.3 58.8
25.0 94.6 99.5 102 99.5 94.6
35.0 112 120 139 120 112
45.0 155 149 145 149 155
55.0 162 166 163 166 162
65.0 194 265 134 265 194
75.0 61.8 88.4 86.6 88.4 61.8
85.0 1.8 1.8 1.7 1.8 1.8
90.0 0.0 0.0 0.0 0.0 0.0
# IESNA91
# [TEST] LSI 37490
# [DATE] 10/22/90
# [MANUFAC] RUUD LIGHTING
# [LUMCAT] QV417
# [LUMINAIRE] 16" QUADRATE VERTICAL / TYPE V
# [LAMP] 175 WATT MH
# TILT=NONE
# Bulbs: 1, 14000 lm each
# Number of measured angles: 11 vertical, 5 horizontal ones
# Photometric type: 1, Units type: 1
# Luminous openig width, length and height: 1.370 1.370 0.000
# Ballast factor: 1, Input power: 215 W
# Source file: qv417.ies
# Luminaire flux = 9864 lm,
# 70.5 % of the bulb flux
# between 75 and 90: 6.2 % of the luminaire flux
# - this part causes just GLARE in case of road lighting and similar purposes
# 80deg and above: max 1.8 cd / 1000 lm , 0.0 % of the luminaire flux
# 90deg and above: max 0.0 cd / 1000 lm , 0.0 % of the luminaire flux
# CutOff Type: Full_CutOff
# 62.5 deg to <67.5 deg: max 265 cd / 1000 lm,
# 67.5 deg to < 76 deg: max 88 cd / 1000 lm,
# maximum spec. lum. intensity 265 cd / 1000 lm
# The following table gives luminous intensities which would be produced
# using a hypothetic bulb giving a luminous flux of 1000 lm (i.e., cd/klm):
# H: 0.0 22.5 45.0 67.5 90.0
#V:
0.0 28.1 28.1 28.1 28.1 28.1
5.0 32.3 32.1 32.0 32.1 32.3
15.0 58.8 59.3 58.1 59.3 58.8
25.0 94.6 99.5 102 99.5 94.6
35.0 112 120 139 120 112
45.0 155 149 145 149 155
55.0 162 166 163 166 162
65.0 194 265 134 265 194
75.0 61.8 88.4 86.6 88.4 61.8
85.0 1.8 1.8 1.7 1.8 1.8
90.0 0.0 0.0 0.0 0.0 0.0