|
|
|
| In left plots, specific illuminances by a continuous row of luminaires spaced 5 and 6 heights are shown in their left halves (right half concerns a single luminaire). | The right plot is for a single luminaire, unrotated. | |
Values below the scale are illuminance / 1 lx. This is for (unrealistic) “unit” case that luminaires would have lamps producing 1 klm only, would be point-like and just 1 m over the terrain.
# IESNA: LM-63-1995
# [TEST] 768805
# [DATE] 11/08/01
# [MANUFAC] COOPER LIGHTING
# [LUMCAT] GFX91MXXAR
# [LUMINAIRE] MED GALLERIA AREA ROUND
# [LAMP] 1000 WATT MH CLEAR BT-37
# [_OTHER] FLAT GLASS
# [_OTHER] FIXED BASE UP
# [_OTHER] 110000
# TILT=NONE
# Bulbs: 1, 110000 lm each
# Number of measured angles: 37 vertical, 1 horizontal ones
# Photometric type: 1, Units type: 1
# Luminous openig width, length and height: 0.000 0.000 0.000
# Ballast factor: 1, Input power: 1000 W
# Source file: gfx9mar.ies
# Luminaire flux = 79515 lm,
# 72.3 % of the bulb flux
# between 75 and 90: 2.2 % of the luminaire flux
# - this part causes just GLARE in case of road lighting and similar purposes
# 80deg and above: max 7.5 cd / 1000 lm , 0.3 % of the luminaire flux
# 90deg and above: max 0.0 cd / 1000 lm , 0.0 % of the luminaire flux
# CutOff Type: Full_CutOff
# 62.5 deg to <67.5 deg: max 228 cd / 1000 lm,
# 67.5 deg to < 76 deg: max 162 cd / 1000 lm,
# maximum spec. lum. intensity 261 cd / 1000 lm
# The following table gives luminous intensities which would be produced
# using a hypothetic bulb giving a luminous flux of 1000 lm (i.e., cd/klm):
0.0 63.9
2.5 61.8
5.0 61.4
7.5 62.6
10.0 65.6
12.5 70.0
15.0 75.0
17.5 82.5
20.0 90.9
22.5 99.0
25.0 106
27.5 112
30.0 116
32.5 119
35.0 121
37.5 121
40.0 124
42.5 130
45.0 139
47.5 154
50.0 179
52.5 200
55.0 231
57.5 261
60.0 253
62.5 228
65.0 196
67.5 162
70.0 126
72.5 88.6
75.0 53.1
77.5 21.6
80.0 7.5
82.5 3.3
85.0 1.4
87.5 0.3
90.0 0.0