|
|
|
|
| In left plots, specific illuminances by a continuous row of luminaires spaced 5 and 6 heights are shown in their left halves (right half concerns a single luminaire). | The right plot is for a single luminaire, unrotated. | |
Values below the scale are illuminance / 1 lx. This is for (unrealistic) “unit” case that luminaires would have lamps producing 1 klm only, would be point-like and just 1 m over the terrain.
# IESNA: LM-63-1995
# [TEST] 766059
# [DATE] 6/13/91
# [MANUFAC] COOPER LIGHTING
# [LUMCAT] HMX40SXXCS
# [LUMINAIRE] 400W HIGH PRESSURE SODIUM TYPE V HIGH MAST
# [LAMP] 400W HPS CL E-18
# [_REFLECTOR] ANODIZED SPUN ALUMINUM
# [_REFRACTOR] FLAT GLASS
# [_SOCKET POSITION] VERTICAL BASE UP
# [_LAMP LUMENS] 50000
# TILT=NONE
# Bulbs: 1, 50000 lm each
# Number of measured angles: 31 vertical, 1 horizontal ones
# Photometric type: 1, Units type: 1
# Luminous opening diameter (and height?): 2.330 ( 2.000 )
# Ballast factor: 1, Input power: 400 W
# Source file: hmx4scs.ies
# Luminaire flux = 32649 lm,
# 65.3 % of the bulb flux
# between 75 and 90: 1.1 % of the luminaire flux
# - this part causes just GLARE in case of road lighting and similar purposes
# 80deg and above: max 5.3 cd / 1000 lm , 0.3 % of the luminaire flux
# 90deg and above: max 0.1 cd / 1000 lm , 0.0 % of the luminaire flux
# CutOff Type: Full_CutOff
# 62.5 deg to <67.5 deg: max 187 cd / 1000 lm,
# 67.5 deg to < 76 deg: max 85 cd / 1000 lm,
# maximum spec. lum. intensity 282 cd / 1000 lm
# The following table gives luminous intensities which would be produced
# using a hypothetic bulb giving a luminous flux of 1000 lm (i.e., cd/klm):
0.0 61.1
5.0 65.2
15.0 39.5
25.0 45.3
35.0 77.4
45.0 203
50.0 261
55.0 282
60.0 233
62.5 187
65.0 134
67.5 85.5
70.0 52.4
72.5 31.8
75.0 18.2
77.5 10.1
80.0 5.3
82.5 2.3
85.0 0.8
87.5 0.1
90.0 0.0
95.0 0.0
105.0 0.0
115.0 0.1
125.0 0.0
135.0 0.0
145.0 0.0
155.0 0.0
165.0 0.0
175.0 0.0
180.0 0.0