[CCD-CR] PROSBA O RADU

[Pavel Marek]

SBIG uvedl nas trh novou kameru a ta je zajímavá zejména vyčítáním přes USB a podle mne vynikajícími parametry. Ale následujících pár dotazů jsem si zkusil zodpovědět a nevím:

1.    V čem je kamera horší než ST7 ??? (možná v ničem, ale kdo ví ???)
2.    Jaké všechny nesmysly kolem v příslušenství se musí přikoupit, aby se to dalo používat pro fotometrii ???
3.    Bude nějaký problém v souvislosti s nyní používanými software v ČR pro zpracování a ovládání ???

Díky Pavel

PS: Odpovedi prosim na astronomy at seznam...

The Model ST-2000XM CCD imaging camera includes two CCD detectors in one head.  One detector is used for guiding and the other for collecting the image.  The guiding detector is the TC211.  The imaging detector is a KAI-2000M CCD with 1600 x 1200 pixels at 7.4 microns.  This new detector has a quantum efficiency similar to the enhanced ABG versions of the E series full frame CCDs.  This camera comes with ABG only.  All of the electronics are integrated into the CCD head.  The standard interface is high speed USB with data transfer rates up to ~400,000 pixels per second.  The camera comes with 1.25" and 2" nosepieces, USB interface cable, telescope interface cable, power supply, Windows control and analytical software with operating manual.

BASIC MODEL = camera with new cooling design, high speed USB interface, cables, power supply, hardware and software necessary to operate with a PC compatible computer.
ABG = antiblooming


      ST-2000XM CCD camera systems (complete) 
        ST-2000XE for PC.  Complete system includes camera with new 2 megapixel KAF-2000M CCD from Kodak, new cooling design, cables, 90-240VAC power supply, Windows 95/98/NT/Me/2000/XP software includes CCDOPS version 5, CCDSoftV5 plus TheSky v.4. $3495.00 
      ST-2000XM Accessories
     

        CFW8A Color Filter Wheel with custom dichroic RGB filters $ 995.00 
        Submersible Pump    $  49.00
     
        Extra Cables, Parallel, Relay, TIC, DRC, etc    $  18.00 
        Extra 1.25" or 2" nosepiece    $  49.00 
        Replacement Brass Desiccant Plug    $  90.00 
        T-Thread Visual Back for SCT     $  49.00 
        Relay Connector Box: (incl's DRC cable)    $ 109.00 
        12 volt DC power supply instead of 90-240VAC with camera   $ 100.00 
        12 volt DC power supply, separate order     $ 160.00 
        Replacement 90-240VAC power supply, separate order $ 160.00 
        CLA-7 Camera Lens Adapter (Specify Canon FD, Pentax bayonet, Olympus or Nikon)    $ 149.00 
        CLA-7 Camera mount only     $  59.00 
        CLA-7 Base only    $  90.00 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://amper.ped.muni.cz/pipermail/ccd/attachments/20020711/93029ef1/attachment.html>