Luminaires are sorted according to an increasing ratio of average/minimum illuminance 
they provide within a rectangle of -1.5625:1.5625:-0.1875:0.875 pole heights. 
The row of luminaires obeys the following limits:
 3.125 as relative spacing (neighbouring poles distance / pole height)
 60 as useful fraction / 1 % (proportion of the flux of the row of luminaires 
                           hitting the rectangle), at least
 8:25 as maximum (for 8 m lamp height) illuminance (/ 1 lx) allowed range within that rectangle 
 3:15 as average (for 8 m lamp height) illuminance (/ 1 lx) range
 1:5 as minimum (for 8 m lamp height) illuminance (/ 1 lx) range
 3 as maximal allowed ratio average/minimum
 100 specific luminous intensity (/ cd/klm) at >=80_degrees, at most.

Command line (-rv# had # in 0, 90, 180, 270 to maximize minimum illuminance)
to produce the inside of each line within this overview: 
 ies2tab -l -mi -co -u-1.5625:1.5625:-0.1875:0.875 -rh3.125 -h8    -e -rv# -n <ldt/file_name>
Non-obligatory parameters to ies2tab were: -h8   

Ev. rotation of the luminaire needed to maximize this value is indicated by
the 1st column larger than 1: -- 2: 90, 3: 180 and 4: 270 degrees

  #  % of Increase of Sky Luminance
  #   due to light going from the luminaire above horizon, as compared
  #   with the luminance produced by the light dispersed from the ground
  #   concerns the following situation:
  #  Albedo = 0.10
  #  Zenith Extinction = 0.30 mag (i.e., direct light remaining  76 %)
  #  Indicatrix type =0 (0: acc. to P.Cinzano, 4..6: CIE sky types)
  
  #  Calculation of the useful fraction of the outcoming luminous flux
  #   concerns a rectangle of -1.56:1.56:-0.19:0.88 pole heights
  #   illuminated by a row of luminaires spaced 3.13 pole heights;
  #   just luminaires closer than 12 pole heights are considered.
  #  Grid is the same as for the illuminance plot, 1 point each 1/30 pole height.
  
  #FiOut 75-90 >= 80degrees    >= 90degrees     65   70  abs.   CutOff?   useful/Out Illum/lx ( 8.0 m, file-given lm)       filename
  #  %    %    cd/klm % Out  cd/klm % Out % ILP.  max. cd/klm                    %    max    av   min  av/min
  
4:   66.0  1.4   16.0   0.3    0.0   0.0    0    251  167  361  Full_CutOff     61.1   19.0  10.5  4.4   2.4  RRWB12
1:   68.3  2.0   44.0   0.4    0.0   0.0    0    356  306  384  Full_CutOff     63.5   22.6  11.7  4.1   2.8  ady35rcf
1:   68.5  1.5   30.0   0.3    0.0   0.0    0    449  321  469  Full_CutOff     64.9   23.0  12.0  4.0   3.0  ady45rcf